Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Configuration register is 0x101 on 3745

Can anyone tell me what that register mean? After the IOS crash, I had set it to x2102, but not it has changed. Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Configuration register is 0x101 on 3745

Config register 0x101 means that the router will Ignore Console Break. Please see the link below for config register understand.

http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a008022493f.shtml

Please use the link below for Cisco config register calculator.

http://www.hopasaurus.com/CISCO_confreg.html

2 REPLIES
Cisco Employee

Re: Configuration register is 0x101 on 3745

Config register 0x101 means that the router will Ignore Console Break. Please see the link below for config register understand.

http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a008022493f.shtml

Please use the link below for Cisco config register calculator.

http://www.hopasaurus.com/CISCO_confreg.html

Blue

Re: Configuration register is 0x101 on 3745

The confReg you show ignores the break key and sets the console baud rate.

Please see the following link for configuration register settings and their affect:

http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a008022493f.shtml

4561
Views
0
Helpful
2
Replies