Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Configuration Register Mistake

I have a Cisco Routers LAP

one of my trained students puts by mistake on a router Configuration Register 0x1242

I can not now loggin in Router by console ( unfortunately no other ports configured to access )

what can we do to take it back ?

Regards,

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Configuration Register Mistake

Hello Ahmed,

the new settings has changed the console speed.

If you can access via telnet the LAP open a session and change it back to 0x2102

conf t

config-register 0x2102

otherwise via console try with:

1200 bps

2400 bps

4800 bps

115000 bps

one of these should be the new speed

Hope to help

Giuseppe

3 REPLIES
Hall of Fame Super Silver

Re: Configuration Register Mistake

Hello Ahmed,

the new settings has changed the console speed.

If you can access via telnet the LAP open a session and change it back to 0x2102

conf t

config-register 0x2102

otherwise via console try with:

1200 bps

2400 bps

4800 bps

115000 bps

one of these should be the new speed

Hope to help

Giuseppe

Hall of Fame Super Silver

Re: Configuration Register Mistake

Hello,

I've found a reference:

bits 11 and 12

11-12 0x0800 to 0x1800 Console line speed:

[12/11] Hex Baud

00 0x0000 9600

01 0x0800 4800

10 0x1000 1200

11 0x1800 2400

Hope to help

Giuseppe

New Member

Re: Configuration Register Mistake

Thank You my friends

It works at 1200

Regards,

191
Views
0
Helpful
3
Replies