Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Configure 1750 router to ADSL with no DHCP

I am configure my 1750 router to ADSL with DHCP, but now I would like to change back to no DHCP just out put the address is 172.16.10.2, so anyone can suggest any idea for me.

I post my DHCP configuration:

version 12.2

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

!

hostname Cisco1750

!

logging queue-limit 100

enable secret xxx

enable password cisco

!

ip subnet-zero

no ip source-route

!

ip name-server 81.88.69.7

!

ip dhcp pool azariah

network 172.16.10.0 255.255.255.0

default-router 172.16.10.2

dns-server 81.88.69.7

!

no ip bootp server

!

interface ATM0

no ip address

no ip proxy-arp

no atm ilmi-keepalive

pvc 0/38

encapsulation aal5mux ppp dialer

dialer pool-member 1

!

dsl operating-mode auto

!

interface FastEthernet0

ip address 172.16.10.2 255.255.255.0

no ip proxy-arp

ip nat inside

speed 100

full-duplex

no cdp enable

!

interface Dialer1

ip address negotiated

ip access-group outside-wan in

ip nat outside

encapsulation ppp

dialer pool 1

dialer-group 1

no cdp enable

ppp authentication chap callin

ppp chap hostname xxxxxx

ppp chap password 0 pppppp

!

ip nat inside source list 1 interface Dialer1 overload

ip classless

ip route 0.0.0.0 0.0.0.0 Dialer1

no ip http server

!

ip access-list extended outside-wan

permit icmp any any net-unreachable

permit icmp any any port-unreachable

permit icmp any any packet-too-big

permit icmp any any administratively-prohibited

permit icmp any any source-quench

permit icmp any any ttl-exceeded

permit icmp any any echo-reply

permit udp any any eq domain

permit tcp any any eq domain

deny tcp any any eq telnet

permit udp any any

permit tcp any eq www 200.16.91.24 0.0.0.7

permit tcp any eq 443 200.16.91.24 0.0.0.7

permit tcp any eq smtp 200.16.91.24 0.0.0.7

permit tcp any eq pop3 200.16.91.24 0.0.0.7

permit icmp any any host-unreachable

deny udp any any eq snmp

!

access-list 1 permit 172.16.10.2 0.0.0.255

dialer-list 1 protocol ip permit

no cdp run

!

line con 0

speed 115200

line aux 0

line vty 0 4

login

!

no scheduler allocate

end

1 REPLY
New Member

Re: Configure 1750 router to ADSL with no DHCP

Hi,

You just need few commands to do this...

Cisco1750#config t

Cisco1750(config)#no ip dhcp pool azariah

Cisco1750(config)#end

Cisco1750#wr

... and you're done.

Regards,

Chris

114
Views
5
Helpful
1
Replies
CreatePlease login to create content