Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

configure dialer on Serial interface

I required the information, can we configure Router Serial interface into Dialer. If it's possible, what type of WAN links and cables are required.

Pls help me in this issue.

3 REPLIES
Silver

Re: configure dialer on Serial interface

Yes you can do, you need CM or ADSL router in your side and this device should connected to any one of the provider device such as CMTS through provider line.

Re: configure dialer on Serial interface

Hi,

You will need ADSL router that supports ppoe.

The router would include ATM interface, you will need to configure the PVC parameters (VPI/VCI) this shoul be provided by the teclo and assigned it to a dialer pool.

You should then configure a dialer interface and binded it to the same group for the ATM interface assigned by the SP.

HTH

Mohamed

Re: configure dialer on Serial interface

Hi,

Ys u can. With the addition, I'd like to inform you that I have configuted Cisco 3845 with the PRI (RAD ASM 52i V.35 & G703 back to back connected) in CO where all site office will dial that perticuler PRI No. via there own BRI.

Thanks

Goutam

139
Views
0
Helpful
3
Replies
CreatePlease login to create content