Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Configure GRE Tunnel on 3560 switch

Hi

I currently have a GRE tunnel terminating on 2xold 3640 routers which I am to replace with 3560 switches.

The current tunnel has an 'ip mtu size' of 1476 to allow for the GRE header of 24 bytes. Initial testing has indicated the MTU size is not configurable on the tunnel interface of the 3560 - could someone please explain how the 3560 switch forwards packets with a max 1500 bytes MTU across the tunnel?

Any help greatly appreciated!

1 REPLY
Hall of Fame Super Silver

Re: Configure GRE Tunnel on 3560 switch

Hello Curtis03,

be aware that a GRE tunnel is supported only on software on a low end multilayer  switch like C3560.

>> could someone please explain how the 3560 switch forwards packets with a max 1500 bytes MTU across the tunnel?

the resulting GRE packet will be fragmented in software as any other GRE packet.

Hope to help

Giuseppe

2470
Views
0
Helpful
1
Replies