cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
866
Views
0
Helpful
2
Replies

configure ip-vpn

zeuscyril
Level 4
Level 4

hi friends,

i got ip connect(ip-vpn) connection from my isp etisalat.i asked my isp to provide ospf.

so, i configured ospf in my cisco router,i can able to see my neibhour routerand the state showing init/drother.

but if i try to ping from my local to etisalt isp gateway i am not able to ping.

my ospf config as follows

router ospf 1

router-id 192.168.1.6 (isp provided ip)

log-adjancies

redistribute connected subnets

network 192.168.1.0 (isp network)

network local network

can u plz help me out how i can access from my local to etisalat gateway

my gateway is 192.168.1.5.(but i can able to ping from router)

2 Replies 2

John Blakley
VIP Alumni
VIP Alumni

What type of connection do you have with your provider? Can your post:

sh ip ospf neigh

sh ip route

sh run | inc ip route

HTH,

John

HTH, John *** Please rate all useful posts ***

Peter Paluch
Cisco Employee
Cisco Employee

Hello,

If you see your ISP's router in the "show ip ospf nei" as INIT/DROTHER then it means that you hear its OSPF Hello packets but it does not hear or accept your Hello packets. Are there perhaps any special requirements for setting up your OSPF given by your ISP?

Also, when looking at your OSPF configuration, I suggest removing the "redistribute connected" command. It won't solve your problem right now but you should not need to redistribute anything in OSPF - just include it using ordinary "network" commands.

Best regards,

Peter

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: