Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Configure SIP for 7600

Hello Experts,

If I have SIP-200 and I need to configure a feature , for eg - PPP on SIP-200 , is it something possible ? If Yes how I can do that in IOS ?

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Configure SIP for 7600

Hello,

SIP-200 itself does support PPP:

http://www.cisco.com/en/US/prod/collateral/routers/ps368/product_data_sheet0900aecd8027c9df.html

However based on the line (cable) you have  you will further need to select SPA. E.G. there are T1/E1 SPAs available where you can directly connect serial line and the configure that for PPP.

E.G.

http://www.cisco.com/en/US/products/hw/routers/ps368/module_installation_and_configuration_guides_chapter09186a008043ff58.html

In case of optics you can install optical SPA and split SONEt into differnt tugs which can be later used as Serial lines over and optical channel.

E.G.

http://www.cisco.com/en/US/partner/docs/interfaces_modules/shared_port_adapters/configuration/7600series/76cfstm1.html

Hope this helps.

Nik

1 REPLY
Cisco Employee

Configure SIP for 7600

Hello,

SIP-200 itself does support PPP:

http://www.cisco.com/en/US/prod/collateral/routers/ps368/product_data_sheet0900aecd8027c9df.html

However based on the line (cable) you have  you will further need to select SPA. E.G. there are T1/E1 SPAs available where you can directly connect serial line and the configure that for PPP.

E.G.

http://www.cisco.com/en/US/products/hw/routers/ps368/module_installation_and_configuration_guides_chapter09186a008043ff58.html

In case of optics you can install optical SPA and split SONEt into differnt tugs which can be later used as Serial lines over and optical channel.

E.G.

http://www.cisco.com/en/US/partner/docs/interfaces_modules/shared_port_adapters/configuration/7600series/76cfstm1.html

Hope this helps.

Nik

212
Views
0
Helpful
1
Replies
CreatePlease login to create content