Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Configuring 7206 for vlan-tagging

hey guys,

need some assistance if possible..

using an MPLS Ethernet handoff provided by the ISP.

RouterA is a Juniper M10i with the following config

RouterA>

show configuration interfaces fe-0/2/0

vlan-tagging;

unit 1 {

description "(new turnup)";

vlan-id 254;

family inet {

address 10.147.15.5/30;

}

I have a 7206 as RouterB at the other end of the MPLS link connected to FastEthernet 1/0...what configuration do I need on the 7206?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Configuring 7206 for vlan-tagging

Hi ,

Try configuring this .

int fa1/0.254

description

encapsulation dot1q 254

ip address 10.147.15.6 255.255.255.252

Hope this helps

regards

vanesh k

3 REPLIES

Re: Configuring 7206 for vlan-tagging

Hi ,

Try configuring this .

int fa1/0.254

description

encapsulation dot1q 254

ip address 10.147.15.6 255.255.255.252

Hope this helps

regards

vanesh k

Silver

Re: Configuring 7206 for vlan-tagging

One more command :

int fa 1/0

no shut

:)

Hope this helps.

New Member

Re: Configuring 7206 for vlan-tagging

Hey guys,

thanks for your inputs!

233
Views
0
Helpful
3
Replies
CreatePlease login to create content