Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

configuring a Cisco 3750-x port for multi vlan

Scenario: I have a vmserver w four virtual servers all in configured w in different subnets. What's the best way to configure a 3750-x switch to route traffic from the virtual servers to their vlans?

Sent from Cisco Technical Support iPhone App

2 REPLIES
New Member

configuring a Cisco 3750-x port for multi vlan

Hi

I think that you will have to provide more information regarding the server itself  for now what would be abvious is if your server NIC support trunking than you need to configure the switch port to trunk

Regards

Mehdi

VIP Super Bronze

Re: configuring a Cisco 3750-x port for multi vlan

If you are using the 3750 as a layer 3 device then you need to creat an SVI for each subnet

If the 3750 is a layer 2 device than you can bundle all your links using an Etherchannel using LACP

HTH

Sent from Cisco Technical Support iPhone App

325
Views
0
Helpful
2
Replies