Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Configuring cisco 3560v2

I just procured    Cisco 3560V2- 48PS-S i would like to know how to set it up from scratch:

1. configuring passwords: enable and priviledge

2. Creat Vlan , such that systems connected to the Vlan can connect to internet.

3. enable routing protocols

4. How do i use the switch as a default gateway for the systems on the vlan

5. how do i make sure the desktops connected to the switch are browsing the internet.

3 REPLIES
VIP Super Bronze

Configuring cisco 3560v2

What is the network looks like?  How many devices do you have?

Are you planning to use the switch as a router or you have router to do the routing for you?

how many vlans you plan to have?

HTH

New Member

Configuring cisco 3560v2

Hi,

What I understand from your post is that you need configuration for the new switch. Well in that case you can send me all your LAN details or a network diagram or your requirements and i can try to do it for you.

Regards,

Pawan Sharma

http://www.ebrahma.com

Hall of Fame Super Gold

Re: Configuring cisco 3560v2

Are you the end user? From your questions seems like you have much confusion about networking, and are using common terms without know their actual meanin and applicaibility.

In that case your best choice would be to engage a reputable consultant, or certified Cisco Partner.

Otherwise, you risk wasting many hours studying and not even get good results.

235
Views
0
Helpful
3
Replies
CreatePlease login to create content