We are currently having issues with the Configuration of Cisco 819 router as we were able to connect to provider network at a point.
Aug 7 09:17:33.631: TTY0: resume timer type 1 (OK) Aug 7 09:17:33.631: CHAT3: Matched chat script gsm to string gsm Aug 7 09:17:33.631: CHAT3: Asserting DTR Aug 7 09:17:33.631: CHAT3: Chat script gsm started Aug 7 09:17:33.631: CHAT3: Sending string: ATDT*98*1# Aug 7 09:17:33.631: CHAT3: Expecting string: CONNECT Aug 7 09:17:33.631: CHAT3: Completed match for expect: CONNECT Aug 7 09:17:33.631: CHAT3: Chat script gsm finished, status = Success
But we still couldn’t browse using the laptop connected to the router.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...