Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

configuring router as ipV6 DHCP server

How to configure a router to make itself as ipV6 DHCP server?

1 REPLY

configuring router as ipV6 DHCP server

Hello

Here is a full discussion to understand how to:

https://learningnetwork.cisco.com/thread/29824

Here is the step-by-step configuration:

http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-dhcp.html

SUMMARY STEPS

1. enable

2. configure terminal

3. ipv6 dhcp pool poolname

4. domain-name domain

5. dns-server ipv6-address

6. prefix-delegation ipv6-prefix/prefix-length client-duid [iaid iaid] [lifetime]

7. prefix-delegation pool poolname [lifetime valid-lifetime preferred-lifetime]

8. exit

9. interface type number

10. ipv6 dhcp server poolname [rapid-commit] [preference value] [allow-hint]

HTH,

Calin

864
Views
0
Helpful
1
Replies
CreatePlease to create content