Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Configuring two 128 Kbps ISDNL line one 256 Kbps ISDN Line

I want to connect 3 branches with ISDN line . All the branches bandwidth requirement is 256 Kbps . As I have suggested the combining 2 ISDN line in to 1 ISDN line by Multilink Group. I have confussion over the configuration .

interface BRI2/0      

encapsulation ppp

dialer rotary-group 1

isdn spid1 0835866201 

isdn spid2 0835866401

!

interface BRI2/1

encapsulation ppp

dialer rotary-group 1

isdn spid1 0835867201

isdn spid2 0835967401

!

interface Dialer1

ip unnumbered Ethernet0/0

encapsulation ppp

dialer in-band

dialer map ip 172.20.2.1 name kdt-nas 8358661

dialer load-threshold 100 either

dialer-group 1

ppp authentication chap callin

ppp multilink

// I don't have the SPID no , I have the ISDN No should i add the country code as well before the We DN no or how it will be in case only ISDN no .  Our ISDN no is 968-24609638 , 639 . Kindl assist me to configure the ISDN .

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Configuring two 128 Kbps ISDNL line one 256 Kbps ISDN Line

hi

i guess its a point to point ISDN line between your locations, as far as i know you dont need to have SPID instead you can configure the remote peer isdn no.

below link provides you a simple sample config which you can try out there..

http://www.cisco.com/en/US/tech/tk713/tk507/technologies_configuration_example09186a00800a3b7a.shtml

regds

2 REPLIES

Re: Configuring two 128 Kbps ISDNL line one 256 Kbps ISDN Line

hi

i guess its a point to point ISDN line between your locations, as far as i know you dont need to have SPID instead you can configure the remote peer isdn no.

below link provides you a simple sample config which you can try out there..

http://www.cisco.com/en/US/tech/tk713/tk507/technologies_configuration_example09186a00800a3b7a.shtml

regds

New Member

Re: Configuring two 128 Kbps ISDNL line one 256 Kbps ISDN Line

Thanks Prem  this is the exact scenario

Rgd's

Sayed Ashraf

328
Views
0
Helpful
2
Replies