Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Confirmation of 'redistribute static' on OSPF

Hi,

Imagine on RouterA I have advertised all respective networks. I do not have any static routes configured (by using ip route command).

That said, is there any need to issue command "redistribute static metric <> metric-type 1 subnets"?

loopback0

ip add 10.0.0.1 255.255.255.0

s0/0

ip add 192.168.0.1 255.255.255.0

router ospf 1

network 10.0.0.0 0.0.0.255 area 0

network 192.168.0.0 0.0.0.255 area 0

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

Re: Confirmation of 'redistribute static' on OSPF

Marlon

If you have no static routes on the router then no you do not need the "redistribute static .." statement under your "router ospf 1" as there are no statics to redistribute.

Redistributing statics is local to the router.

Jon

1 REPLY
Hall of Fame Super Blue

Re: Confirmation of 'redistribute static' on OSPF

Marlon

If you have no static routes on the router then no you do not need the "redistribute static .." statement under your "router ospf 1" as there are no statics to redistribute.

Redistributing statics is local to the router.

Jon

127
Views
0
Helpful
1
Replies
CreatePlease to create content