Ok, my problem is that i've created a VLAN just for testing server. I set this up and assign a static ip to my server. I only want my server to be able to access our proxy server to get out to the internet to pull down updates\etc. I've setup the ACLS As follows:
description VLAN 13 SERVER BUILD VLAN 172.17.13.0/24
ip address 172.17.13.3 255.255.255.0
ip access-group 114 in
ip access-group Server_Build_ACL out
no ip redirects
ip pim sparse-dense-mode
standby ip 172.17.13.1
standby priority 110
ACL on switch:
ip access-list extended Server_Build_ACL
permit ip 172.17.13.0 0.0.0.255 host 192.168.176.132
Can you just clarify. What is the address of the test server and what is the proxy server address.
if the test server address is from the 172.17.13.x subnet range (vlan 13) and your proxy server is 192.168.176.132 then it looks to me as though your access-list lists are applied the wrong way round ie:
This has done the trick. but i'm still confused as to why. The 114 ACL was set to in to allow traffic from the Proxy (192.168.x.x) into the VLAN13. And the other set to out, to allow vlan 13 traffice out to the Proxy. I need a refresher on ACL's as it seems to work opposite at to how you'd expect.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.