Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Connect two routers with HWIC-1ADSL modules

Hello,

I couldn't find whether this module can be used as a central site DSL device(the client function is sure). This is needed to directly connect to Cisco router equipped with HWIC-1ADSL modules. I was using by now two Zyxel modems, but there is a difference between the two models (one of them is especially specified as a cetral side modem).

I will appreciate any answer!

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Connect two routers with HWIC-1ADSL modules

Hello Georgi,

back to back connections are possible only with SDSL SHDSL modules.

All adsl modules are only capable to perform the client side role (ATU-R).

You need two network modules or VWICs for SDSL SHDSL

see

http://www.cisco.com/en/US/tech/tk175/tk274/technologies_configuration_example09186a0080135834.shtml

Hope to help

Giuseppe

2 REPLIES
Hall of Fame Super Silver

Re: Connect two routers with HWIC-1ADSL modules

Hello Georgi,

back to back connections are possible only with SDSL SHDSL modules.

All adsl modules are only capable to perform the client side role (ATU-R).

You need two network modules or VWICs for SDSL SHDSL

see

http://www.cisco.com/en/US/tech/tk175/tk274/technologies_configuration_example09186a0080135834.shtml

Hope to help

Giuseppe

New Member

Re: Connect two routers with HWIC-1ADSL modules

Thanks man,

useful information. I had some suspicions it is so...

151
Views
0
Helpful
2
Replies
CreatePlease login to create content