01-19-2014 05:59 AM - edited 03-04-2019 10:07 PM
Hi All,
I am having issues getting to the internet from the PC. It's currently connected to the cisco 877w via FE0.
The PC is able to grab the correct IP address. Even when I input the dns [8.8.8.8], I am still not able to access the internet.
Attached is the config -
================================
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
!
!
dot11 syslog
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.1.254
!
ip dhcp pool HOME-DHCP
import all
network 192.168.1.0 255.255.255.0
default-router 192.168.1.254
dns-server 8.8.8.8
!
!
no ip bootp server
ip name-server 8.8.8.8
ip name-server 165.21.100.88
!
!
!
!
!
archive
log config
hidekeys
!
!
!
!
!
interface ATM0
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0.1 point-to-point
description $ES_WAN$$FW_OUTSIDE$
ip flow ingress
pvc 0/100
encapsulation aal5snap
protocol ppp dialer
dialer pool-member 1
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Dot11Radio0
no ip address
shutdown
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
!
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$$ES_LAN$$FW_INSIDE$
ip address 192.168.1.254 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
!
interface Dialer0
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication pap callin
ppp pap sent-username xxx@xxx password 7 130D44185206173829
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer0
!
no ip http server
no ip http secure-server
!
!
!
!
control-plane
!
!
line con 0
no modem enable
line aux 0
line vty 0 4
!
scheduler max-task-time 5000
end
Solved! Go to Solution.
01-19-2014 06:05 AM
Can you ping 8.8.8.8 from your router? If so, all you'll need is to configure nat on the router:
access-list 100 permit ip 192.168.1.0 0.0.0.255 any
ip nat inside source list 100 interf dialer0 overload
int vlan 1
ip nat inside
int dial0
ip nat outside
HTH,
John
*** Please rate all useful posts ***
01-19-2014 06:05 AM
Can you ping 8.8.8.8 from your router? If so, all you'll need is to configure nat on the router:
access-list 100 permit ip 192.168.1.0 0.0.0.255 any
ip nat inside source list 100 interf dialer0 overload
int vlan 1
ip nat inside
int dial0
ip nat outside
HTH,
John
*** Please rate all useful posts ***
01-19-2014 06:15 AM
Thanks so much for the help! All is working fine now. So it's all about the ACLs that is causing the issue. cheers.
One more question - can someone please teach me how to configure the wireless module of this 877w?
01-19-2014 06:07 AM
Can you souce a ping from your vlan1 interface to 8.8.8.8?
For Example: ping 8.8.8.8 source 192.168.1.254
Also can you post the results of a traceroute to 8.8.8.8 from this PC?
And my last question, is your Internet Service currently up?
01-19-2014 06:16 AM
@John - thanks but I got it all sorted out.
cheers
If you can assist with the wireless, it would be very much appreciated!
01-19-2014 06:37 AM
Can you start a new post about your wireless issue?
Thanks!
John
*** Please rate all useful posts ***
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide