Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Connecting Slingbox through a Cisco 1811 router

                   We have a department that is connecting a Slingbox to a network behind a Cisco 1811 that is connected to the internet via a cable circuit.  the Slingbox operates on port 5001.  how can i get the traffic to the device

Slingbox public IP: 74.143.29.66

Slingbox Private IP: 10.14.10.228

Slingbox Port: 5001

Everyone's tags (3)
1 REPLY
Cisco Employee

Connecting Slingbox through a Cisco 1811 router

Hi,

You need to configure a static NAT entry to allow traffic to the global address to get to the local address.

ip nat inside source static tcp 10.14.10.228 5001 74.143.29.66 5001

or if the outside interface address is likely to change:

ip nat inside source static tcp 10.14.10.228 5001 interface 5001

You will also need to change the inbound ACL, if you have one, to allow traffic destined to port 5001.

Regards

Harold Ritter
Sr. Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México 
Paseo de la Reforma 222 Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
348
Views
0
Helpful
1
Replies