Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Connecting to server on client network via ADSL

Hi,

ADSL Router setup at a client site. Router has following config for client network

!

interface FastEthernet0

description connected to cleint-inside

!

!

interface Vlan1

ip address 172.16.111.254 255.255.252.0

ip nat outside

ip virtual-reassembly

ip tcp adjust-mss 1452

!

Would I just add in ' ip nat inside source static tcp 172.16.113.2 3389 interface Dialer0 3389' to connect to the server on the client network from outside?

I'm using a 877W ADSL router. What other config extract can I provide to get this working?

I want to do it this way because I cannot get the VPN to our office network working.

Please help.

3 REPLIES
New Member

Re: Connecting to server on client network via ADSL

That should work.

You'll also need 'ip nat inside' on the vlan1 interface, and 'ip nat outside' on the dialer0 interface.

Good Luck.

New Member

Re: Connecting to server on client network via ADSL

Would you like to see the entire config for this router?

I am also battling to get the VPN connection up.

New Member

Re: Connecting to server on client network via ADSL

Did nat work out for you?

Post your config, and the VPN piece should be simple as well.

118
Views
0
Helpful
3
Replies
CreatePlease login to create content