connection problem between FWSM and Cisco 10000 fastEthernet interface
I have a problem on a link connecting FWSM of Cat6513 and Cisco 10000 fast ethernet interface. I can ping the FWSM outside interface from the router side but when I try to do a ping from the FWSM, there is a packet drop. The actual link between the devices is an optical fibre link but there is a fibre-to-ethernet converter at each end. Please help figure out the problem.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...