Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Conversation

Hi,

I have a server connected to a 6509 switch with an MSFC. How to view the ingress and eggress traffic on that port given the fact that this is a CATOS.

Regards,

Rathish

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Conversation

Hi Rathish,

show mac [utilization] [mod[/port]] will give you the desired output when you are running catos.

If you just run sh mac it will display the stats for all the mod and port and you can be specific to

sh mac

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_7_5/cmd_ref/sh_ml_n.htm#wp1028548

This link will give you the command details with example

HTH, if yes please rate the post.

Ankur

2 REPLIES

Re: Conversation

Hi Rathish,

show mac [utilization] [mod[/port]] will give you the desired output when you are running catos.

If you just run sh mac it will display the stats for all the mod and port and you can be specific to

sh mac

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_7_5/cmd_ref/sh_ml_n.htm#wp1028548

This link will give you the command details with example

HTH, if yes please rate the post.

Ankur

Bronze

Re: Conversation

By viewing ingress / egress traffic, do you mean to say you are trying to capture traffic off that port or do you wish to see the statistics of MLS performance ?

88
Views
0
Helpful
2
Replies
CreatePlease login to create content