02-27-2006 11:19 PM - edited 03-03-2019 11:53 AM
Hi,
I have a server connected to a 6509 switch with an MSFC. How to view the ingress and eggress traffic on that port given the fact that this is a CATOS.
Regards,
Rathish
Solved! Go to Solution.
02-27-2006 11:25 PM
Hi Rathish,
show mac [utilization] [mod[/port]] will give you the desired output when you are running catos.
If you just run sh mac it will display the stats for all the mod and port and you can be specific to
sh mac
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_7_5/cmd_ref/sh_ml_n.htm#wp1028548
This link will give you the command details with example
HTH, if yes please rate the post.
Ankur
02-27-2006 11:25 PM
Hi Rathish,
show mac [utilization] [mod[/port]] will give you the desired output when you are running catos.
If you just run sh mac it will display the stats for all the mod and port and you can be specific to
sh mac
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_7_5/cmd_ref/sh_ml_n.htm#wp1028548
This link will give you the command details with example
HTH, if yes please rate the post.
Ankur
02-27-2006 11:28 PM
By viewing ingress / egress traffic, do you mean to say you are trying to capture traffic off that port or do you wish to see the statistics of MLS performance ?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: