Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Converting CatOS to IOS for Catalyst 6509

Dear All,

I am converting a Cat 6509 from CatOS to IOS, i've found a nice pdf "http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00801350b8.shtml", but i have a problem; i can't find the appropriate image on the Cisco website.

When i search i found either one of 2 --> MWAM or CCM which i think that both are not what i need.

Can anybody advice how to get the appropriate one.

Thanks in advance.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Converting CatOS to IOS for Catalyst 6509

Hi,

Do you have a CCO login.

If yes, then you can dowload it from here :

http://www.cisco.com/kobayashi/sw-center/lan/cat6000-sup-ios.html

HTH,Please rate if it does.

-amit singh

1 REPLY

Re: Converting CatOS to IOS for Catalyst 6509

Hi,

Do you have a CCO login.

If yes, then you can dowload it from here :

http://www.cisco.com/kobayashi/sw-center/lan/cat6000-sup-ios.html

HTH,Please rate if it does.

-amit singh

101
Views
0
Helpful
1
Replies
CreatePlease to create content