Pls explain me if i copy and paste mpeg file of one 790 mb from local network to remote network acros the wan network .is this a udp traffic or tcp traffic?and what type of proccess happend at that time?
If you're referring to copying a file from one location to another on a Windows network, then you're going to be using SMB (Server Message Block), which is a protocol which runs on TCP, and uses port 445.
Wikipedia has a good article on SMB; please look here:
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...