HI all,
Here is some output information about this interface which connect a P router to a PE router by a direct fiber link, I posted this issue days ago, as the errors didn't fall into any "error category" we changed gbit and fiber in order to discart any phisical problem, but the interface is acting in the same way...
Maybe a cosmetic bug?
P01#sh int gi2/1
GigabitEthernet2/1 is up, line protocol is up (connected)
Hardware is C6k 1000Mb 802.3, address is 0015.c674.5b80 (bia 0015.c674.5b80)
Description: "LAN-2"
Internet address is 10.9.128.185/29
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 1000Mb/s, media type is SX
input flow-control is off, output flow-control is off
Clock mode is auto
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:03, output hang never
Last clearing of "show interface" counters 3w0d
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Packet Drop strategy: random early detection (DWRED)
Output queue: 0/40 (size/max)
5 minute input rate 184000 bits/sec, 163 packets/sec
5 minute output rate 227000 bits/sec, 76 packets/sec
L2 Switched: ucast: 322327 pkt, 22582413 bytes - mcast: 619541 pkt, 54936288 bytes
L3 in Switched: ucast: 73474516 pkt, 22669324805 bytes - mcast: 61470 pkt, 5901016 bytes mcast
L3 out Switched: ucast: 49581920 pkt, 16821811640 bytes mcast: 562004 pkt, 52764082 bytes
74599811 packets input, 22771306818 bytes, 0 no buffer
Received 803377 broadcasts (58516 IP multicast)
0 runts, 0 giants, 0 throttles
8496526 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
50933386 packets output, 16754829095 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
0 output buffer failures, 0 output buffers swapped out
