Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Could not expand chunk pool for ipnat node

Hi,

I have a 1841, running some NATs. I am getting this error. Any idea why is this so? Any how do I go about resolving it?

Dec 1 06:50:38: %SYS-2-MALLOCFAIL: Memory allocation of 65536 bytes failed from 0x601E6E58, alignment 8

Pool: Processor Free: 387028 Cause: Memory fragmentation

Alternate Pool: None Free: 0 Cause: No Alternate pool

-Process= "IP Input", ipl= 0, pid= 52 -Traceback= 0x6083BD30 0x601D7250 0x601DBD34 0x601DD100 0x601E6E60 0x601E68CC 0x601E8290 0x601E6530 0x60C7004C 0x60C71424 0x60C73790 0x60C6F21C 0x60B2C7D4 0x60B2EBF4 0x60B2EF58 0x60B2EFD8

Dec 1 06:50:39: %SYS-2-CHUNKEXPANDFAIL: Could not expand chunk pool for ipnat node. No memory available -Process= "Chunk Manager", ipl= 3, pid= 1 -Traceback= 0x6083BD30 0x601E67A8

Dec 1 06:50:49: %SYS-2-CHUNKEXPANDFAIL: Could not expand chunk pool for ipnat node. No memory available -Process= "Chunk Manager", ipl= 3, pid= 1 -Traceback= 0x6083BD30 0x601E67A8

Dec 1 06:50:59: %SYS-2-CHUNKEXPANDFAIL: Could not expand chunk pool for ipnat node. No memory available -Process= "Chunk Manager", ipl= 3, pid= 1 -Traceback= 0x6083BD30 0x601E67A8

Dec 1 06:51:09: %SYS-2-MALLOCFAIL: Memory allocation of 65536 bytes failed from 0x601E6E58, alignment 8

Pool: Processor Free: 386848 Cause: Memory fragmentation

Alternate Pool: None Free: 0 Cause: No Alternate pool

-Process= "Chunk Manager", ipl= 3, pid= 1 -Traceback= 0x6083BD30 0x601D7250 0x601DBD34 0x601DD100 0x601E6E60 0x601E65D8 0x601E6764

Dec 1 06:51:09: %SYS-2-CHUNKEXPANDFAIL: Could not expand chunk pool for ipnat node. No memory available -Process= "Chunk Manager", ipl= 3, pid= 1 -Traceback= 0x6083BD30 0x601E67A8

1 REPLY
Silver

Re: Could not expand chunk pool for ipnat node

It means " not enough processor memory left to expand this chunk pool. " ( ie memory is not being released, eventually resulting in chunk memory allocation (MALLOC) failures ). Better you reload the device.

1536
Views
0
Helpful
1
Replies