cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
369
Views
0
Helpful
2
Replies

CPU utilization high

martin_lx1980
Level 1
Level 1

From yesterday night, lots of error informations appear in cisco 7506 and errors pop all the time until now.

%OSPF-5-ADJCHG: Process 1, Nbr x.x.x.x on GigabitEthernet3/48 from LOADING to FULL, Loading Done

%SYS-3-CPUHOG: Task is running for (2680)msecs, more than (2000)msecs (5/4),process = PPP manager.

-Traceback= 4035DA8C 4035220C 403609D0 402BFBA4 41215F44 412E5690 412E5CE8 40B9A9BC 40BA0FCC 40B9CCF0 81D12C08

So i check CPU utilization

TJ_R2#sh process cpu | inc PPP

101 4 143 27 0.00% 0.00% 0.00% 0 PPP auth

103 0 1 0 0.00% 0.00% 0.00% 0 PPPATM Session d

124 16 182 87 0.00% 0.00% 0.00% 0 PPP IP Add Route

134 0 1 0 0.00% 0.00% 0.00% 0 PPP HA

148 4377648 5640964 776 0.00% 11.30% 9.76% 0 PPP manager

197 2492 6512993 0 0.00% 0.00% 0.00% 0 Multilink PPP

230 0 2 0 0.00% 0.00% 0.00% 0 Multilink PPP ou

Does PPP manager cause the issue?How could I do next?

Thanks a lot!

1 Accepted Solution

Accepted Solutions

royalblues
Level 10
Level 10

Traceback mostly points to a software issue.

Try upgrading the IOS

Narayan

View solution in original post

2 Replies 2

royalblues
Level 10
Level 10

Traceback mostly points to a software issue.

Try upgrading the IOS

Narayan

The issue is solved. It is a software bug. When I shut down and no shut down a serial interface, errors disappear.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card