cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
426
Views
0
Helpful
4
Replies

CPU Utilization

medo_shakl
Level 1
Level 1

 

Dears

 

I need to know if CPU utilization is normal or not as per show command below

Switch Model is 3560

 

100                                                                       
 90                                                                       
 80                                                                       
 70     *        *                                                        
 60     *     *  *          *                     *           *           
 50    **     *  *  *     * *   *     *     * *   *     *     *     *    *
 40    **   * ** *  ** *  * *   *     *** * * *  **     *     *     *** **
 30  ****** **** *  ***** * **  *  ********** ** **** * **    ** *********
 20 **********************************************************************
 10 ######################################################################
   0....5....1....1....2....2....3....3....4....4....5....5....6....6....7.
             0    5    0    5    0    5    0    5    0    5    0    5    0
                   CPU% per hour (last 72 hours)
                  * = maximum CPU%   # = average CPU%

1 Accepted Solution

Accepted Solutions

If you are able to, upgrade the IOS of your switch to 12.2(55)SE9 for better stability.

View solution in original post

4 Replies 4

Leo Laohoo
Hall of Fame
Hall of Fame

Post the outputs to the following commands: 

  1. sh version; 
  2. sh proc cpu | ex 0.00

DC-SW-192-IBM#show version
Cisco IOS Software, C3560 Software (C3560-ADVIPSERVICESK9-M), Version 12.2(40)SE, RELEASE SOFTWARE (fc3)
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Fri 24-Aug-07 01:43 by myl
Image text-base: 0x00003000, data-base: 0x01800000

ROM: Bootstrap program is C3560 boot loader
BOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(25r)SEC, RELEASE SOFTWARE (fc4)

DC-SW-192-IBM uptime is 27 weeks, 6 days, 21 hours, 0 minutes
System returned to ROM by power-on
System restarted at 15:33:16 cairo Mon Nov 25 2013
System image file is "flash:/c3560-advipservicesk9-mz.122-40.SE.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C3560-24PS (PowerPC405) processor (revision R0) with 122880K/8184K bytes of memory.
Processor board ID FDO1219X1UC
Last reset from power-on
2 Virtual Ethernet interfaces
24 FastEthernet interfaces
2 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address       : 00:21:A1:2A:64:00
Motherboard assembly number     : 73-9673-10
Power supply part number        : 341-0029-05
Motherboard serial number       : FDO12190JHH
Power supply serial number      : LIT121509JV
Model revision number           : R0
Motherboard revision number     : A0
Model number                    : WS-C3560-24PS-S
System serial number            : FDO1219X1UC
Top Assembly Part Number        : 800-25861-05
Top Assembly Revision Number    : A0
Version ID                      : V07
CLEI Code Number                : COMUY10ARA
Hardware Board Revision Number  : 0x01


Switch   Ports  Model              SW Version              SW Image            
------   -----  -----              ----------              ----------          
*    1   26     WS-C3560-24PS      12.2(40)SE              C3560-ADVIPSERVICESK


Configuration register is 0xF

 

 

 

 

CPU utilization for five seconds: 6%/1%; one minute: 6%; five minutes: 6%
 PID Runtime(ms)   Invoked      uSecs   5Sec   1Min   5Min TTY Process
 164    85609058 585472840        146  0.79%  0.42%  0.44%   0 Spanning Tree   

 

 

If you are able to, upgrade the IOS of your switch to 12.2(55)SE9 for better stability.

jossabor
Level 1
Level 1

What you are seeing here is the output for the last 72 hours, the * symbols mean the maximum cpu utilization that it reached during the hour specified, it could be even just a second that it got there, the # symbols mean the average that it had over the full hour, lets take in example hour 5, you see that maximum cpu reached was 70%, however that does not really mean high cpu since the average was 10% which is really common. In the last 72 hours your average was 10%, with some common picks.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card