Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CR-ASR1002 w/ ADVIIPSERVICEK9-M Version 15.3(3) NTP logging to remote syslog server

Hi,

I am testing functions on an ASR-1002 with IOS 15.3(3). The exact IOS  I am using is 'asr1000rp1-advipservicesk9.03.10.00.S.153-3.S-ext'.

I currently have problem for the router to log NTP synch and unsynchrononized message to a remote server.

All the others messages are properly logged, only NTP is not. I would like to know if it's a regular feature of this OS or if I am doing something wrong.

Also, when looking at the debug messages for NTP, I realized the messages type are different than regular logging message.

Below is the conf I implemented and the messages type for NTP logging.

Any pointer in the right direction is welcomed.

Thanks in advance,

 

-------from here conf----------

<snip>

logging trap debugging

logging source-interface GigabitEthernet0 vrf SOME-VRF

logging host XXX.XXX.XXX.XXX vrf SOME-VRF

<snip>

ntp logging

-------from here logging messages type----------

%LINEPROTO-5-UPDOWN: Line bla bla..(<--'regular' messages that got logged on the remote syslog server)

NTP Core (NOTICE): Clock synchronization lost (<--NTP messages, they do not get logged on the remote server).

-----------------------End------------------------------------------

Everyone's tags (1)
66
Views
0
Helpful
0
Replies
CreatePlease login to create content