Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Creating L2TP tunnel

Is there a way to create an l2tp tunnel between two routers, without using encryption or vpn? I just need to extend a layer 2 network for multicast traffic. thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: Creating L2TP tunnel

Grimes

You can do this with the help of PSEUDOWIRE and XCONNECT

Router# pseudowire-class abc

Router(config-pw)# encapsulation l2tpv3

Router(config-pw)# ip local interface loopback 0

int fa0/0.10

encapsulation dot1q 10

Router(config-if)# xconnect peer-router-id vc-id encapsulation l2tpv3 pseudowire-class abc

regards

shivlu

1 REPLY
Silver

Re: Creating L2TP tunnel

Grimes

You can do this with the help of PSEUDOWIRE and XCONNECT

Router# pseudowire-class abc

Router(config-pw)# encapsulation l2tpv3

Router(config-pw)# ip local interface loopback 0

int fa0/0.10

encapsulation dot1q 10

Router(config-if)# xconnect peer-router-id vc-id encapsulation l2tpv3 pseudowire-class abc

regards

shivlu

426
Views
0
Helpful
1
Replies