Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

critical error was occured , CEF no memory..

HI first of all, the system log like below:

Jun 18 08:59:28 c_kc2 4577: Jun 18 09:42:17 KST: %FIB-2-FIBDISABLE: Fatal error, slot 8/0 (8): CEF-Common: no memory

Jun 18 08:59:28 c_kc2 4578: SLOT 8: Jun 18 09:42:17 KST: %SYS-2-MALLOCFAIL: Memory allocation of 65536 bytes failed from 0x4022FA00, alignment 4

On the our SIP-200 with 4 FE, We get the above log. our system component like this:

RSP-720-3CXL, FlexWAN 4EA, SIP-200 1EA.

Why the above symtom was occured?

Any thought?

Thanks in advance

3 REPLIES
Hall of Fame Super Silver

Re: critical error was occured , CEF no memory..

Hello Sung,

>> Why the above symtom was occured?

Because the linecard CEF memory is ended you may consider a memory upgrade on it if possible.

Have you got any DFC or CFC installed on it ?

You can post sh module to see this

Edit:

I mean the linecard attempts to have a complete copy of the CEF table as created by supervisor but it fails.

Hope to help

Giuseppe

Community Member

Re: critical error was occured , CEF no memory..

HI..

Thank you for your comment on my question.

AS I wrote above article, Our module is SIP-200, it has no DFC card on it.

and then routing table on RSP 720 is only 644 only,, It's quite a little on RSP 720.

I know that the mem error was caused above symtom, but It is not a memory utilization issue.

Please Let me know if I can do for you if anything.

Thank in advance.

Hall of Fame Super Silver

Re: critical error was occured , CEF no memory..

Hello Sung,

so two possibilities are left:

a software bug

a problem on memory chips on the linecard

Hope to help

Giuseppe

146
Views
0
Helpful
3
Replies
CreatePlease to create content