11-23-2005 12:09 PM - edited 03-03-2019 11:03 AM
I noticed my port lights are not illuminated on two 3550's connected together at port 12 via a xover cable (tried a new cable same problem), ...any ideas?
Thx.
11-23-2005 12:19 PM
I have the following setup for xover port 12;
No Switchport
No IP address
shutdown
duplex full
11-23-2005 08:33 PM
The interface is shut. did u try unshut the interface ....... ?
Regds
11-24-2005 05:11 AM
How do you restart an interface (3550 ios 12.1 (22))?
11-24-2005 05:32 AM
Hi
it would be ideally no shutdown command which will enable the interface.
hope u are aware the procedure on how to get onto the interface level mode where you keyin this command..
regds
11-24-2005 05:38 AM
Hi
it would be ideally no shutdown command which will enable the interface.
hope u are aware the procedure on how to get onto the interface level mode where you keyin this command..
regds
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide