What would the expected behaviour be for a traffic destined for a Vserver on the CSM module if it and then it's failover failed. Will the MSFC module step in and continue routing traffic ? or is a Disaster scenrio ?
I dont think the MSFC module will step in and continue routing traffic once the failover itself gets failed. But can't assure you this since I have never come across such a situation in my network. Are you facing this problem?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...