Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CSR1000v WCCP

Hi,

does anyone have experience with CSR1000V and WCCP ?

We're struggeling with getting the physical WAE connected onto the CSR.

Debugs show the HIA packets but it's not coming up.

We also tried to enable promiscious mode on the interface which also didn't fix the problem.

Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-ADVENTERPRISEK9-M), Version 15.3(2)S2, RELEASE SOFTWARE (fc1)

IOS XE Version: 03.09.02.S

It runs on ESX

3 REPLIES

CSR1000v WCCP

Hi Brandon,

On your ESX vSwitch, what security settings do you have? I've not tried the CSR 1000V with WAE/WCCP, but have seen issues when using CSR 1000V with Riverbed Steelhead unless I changed the Promiscuous Mode setting under the vSwitch Security tab from Reject to Accept.

Regards

New Member

CSR1000v WCCP

Tried with reject , tried with accept, no working.

packet dump shows HIA packets and conversation between WAE <->CSR

New Member

CSR1000v WCCP

it was the assignment method.

CSR supports only mask assignment like the ASR.

Problem fixed.

641
Views
0
Helpful
3
Replies
CreatePlease login to create content