My customer would like to encrypt traffic across all our private P2P circuits. We have a hub-spoke topology with 50 spoke routers per one hub router. After some searches, I narrowed down to these options:
GET (Group Encryption Transport): This is exactly what we want except it only works on 12.4T. No go.
P2P IPsec over GRE: a pain to set it up with multiple P2P circuits on the hub router. No go.
DMVPN: easier to set it up than P2P IPsec over GRE. This might work.
Are there other options available for me to simply encrypt traffic without setting up tunnels? By the way, it has to be done from the current router, cannot purchase additional hardware.
Re: Data Encryption Options over Private P2P Circuits
Don't have a suggestion on other alternatives. However, if you can't purchase hardware, and your current hardware doesn't support hardward encryption, just want to insure you're aware that you might see a huge drop in performance.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.