Minimum you can send traffic upto 512kbps at a time. But when When you try to ping using large packets with prec 1 you can see some drops although the amount of traffic is way below 512k and the burst size is 12500 bytes.
Can you pls try to use other traffic generator like PAGENT which will have constant bit rate traffic? I think the ping traffic may be bursty and that's why when you tune the burst paramter, it helps to reduce the drops. Also, you can try to keep increasing the burst paramter until there are no drops.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...