Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

ddns no-ip.org don´t update

Hi,

I have a problem with a ddns configuration on a Cisco 887va.

I have a free account in no-ip.org but, when i configure the router with the configuration of this site, my router doesn´t update the public IP on this site.

the configuration is the following:

ip name-server 8.8.8.8

ip name-server 8.8.4.4

ip ddns update method no-ip

HTTP

  add http:// ****:****@dynupdate.no-ip.com/nic/update?hostname=<h>&myip=<a>

interval maximum 0 0 5 0

interval minimum 0 0 5 0

interface Dialer0

mtu 1492

bandwidth 800

bandwidth receive 20000

ip ddns update hostname test1home.no-ip.org

ip ddns update no-ip host dynupdate.no-ip.com

ip address negotiated

ip flow ingress

ip nat outside

ip virtual-reassembly in

encapsulation ppp

dialer pool 1

dialer-group 1

ppp authentication chap pap callin

ppp chap hostname xxxxx@xxxxxxx

ppp chap password 7 xxxxxxxxxxxxxxxx

ppp pap sent-username xxxxxxx@xxxxxxxxxxx password 7 xxxxxxxxxxxxxxx

no cdp enable

!

Best regards.

Everyone's tags (5)
2 REPLIES
New Member

ddns no-ip.org don´t update

I have exactly the same problem....

When I type in the url manually on a webpage I get a 'GOOD' response from the No-IP ddns server - however, if I force ddns update by shut/no shut of the interface, I can see the ddns request going out and then the router times out stating error in updating ddns.

New Member

is there anyone who has luck

is there anyone who has luck with no-ip on cisco ? i have followed both below articles but no luck.. debug wont reveal any thing. http://www.firewall.cx/cisco-technical-knowledgebase/cisco-routers/811-cisco-router-ddns.html http://www.openna.com/docs/enable_ddns_noip_cisco.php
3382
Views
0
Helpful
2
Replies