Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Dead 2811

Hello,

I have received a 2811 from a lab, and now it does not shows the boot process, nor the rommon, and does not respond to anything. I have tried with all the console speeds.

Any idea??

thanks

5 REPLIES

Re: Dead 2811

I assume it powers up. Try the AUX port at different speeds. See if you get any characters. If no, take all the modules and flash card out, reset the DRAM and try again.

New Member

Re: Dead 2811

Hello,

I have tried with Console and Aux at all the speeds, and nothing comes from the serial port. Of course I have tested my serial. Also I have removed cards and so on, and the router remains the same. The only thing I am sure that works are the fans. Any more idea (a jumper or something like that)?

Re: Dead 2811

New Member

Re: Dead 2811

Hello,

Only A light in fastethernet 1 is on, all others (power and so on) are off.

It seems that a board is broken. Many thanks.

Re: Dead 2811

Sounds like its ready for a dirt nap.

122
Views
5
Helpful
5
Replies