on our network, we have two gateways to the internet, one a checkpoint firewall and the other is a cisco asa appliance. All the devices default gateway is a cisco 3500 series which handles all the routing. Basically, I want to configure some type of policy-based routing so that traffic coming from a particular IP destined to the outside would use the cisco asa appliance and the rest of the traffic default gateway would be to the checkpoint. What's the best way to do this.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...