action 7.0 cli command "Redistribution has been readded"
The part that I haven't been able to test is the correlation of events. I believe this should work in the sense that once the bgp neighbor comes back up and 5 minutes has passed, then the script will run and readd your redistribution lines to your routing processes. You'd want to substitute your BGP neighbor's IP for the addresses that I used above.
You put me on the right track with the script. I've tested it in the lab, but was wondering if there was a way to put in a conditional loop that would restart the counter should the BGP peer relationship go down prior to the 5 minute counter elapsing.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...