Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Delays on ASR1006

Hello everybody!

I have ASR1006 with two 10Gbps ports.

If  payload of interfaces about 20% I get 0.2-0.5 ms ICMP-replay throw ASR1006.

If  payload of interfaces about 65% and above I get delay 20-40 ms . CPU payload about 60-70%.

On ASR1006 were instaled vpdn, nat, qos, rip, ospf.

asr1000rp2-advipservicesk9.03.05.00.S.152-1.S.bin

How can I reduсe delays on ASR1006?

1) traceroute throw ASR1006

traceroute to ya.ru (213.180.193.3), 64 hops max, 52 byte packets

1  192.168.136.1  0.491 ms  0.119 ms  0.130 ms

2  172.16.0.1  38.619 ms  40.724 ms  43.697 ms

3  62.140.253.1  42.982 ms  38.835 ms  43.735 ms

4  80.77.167.33  46.141 ms  46.609 ms  56.576 ms

5  62.140.245.218  56.725 ms  56.400 ms  56.018 ms

6  77.88.56.126  46.285 ms  46.675 ms  43.208 ms

7  * * *

8  213.180.193.3  42.033 ms  43.981 ms  40.018 ms

2) traceroute without ASR1006

traceroute -n 213.180.193.3

traceroute to 213.180.193.3 (213.180.193.3), 30 hops max, 40 byte packets

1  62.140.253.1  0.274 ms  0.228 ms  0.285 ms

2  80.77.167.33  1.009 ms  0.993 ms  0.991 ms

3  62.140.245.218  1.290 ms  1.314 ms  1.300 ms

4  77.88.56.126  1.512 ms  1.393 ms  1.474 ms

5  * * *

6  213.180.193.3  1.506 ms  1.688 ms  1.847 ms

  • WAN Routing and Switching
Everyone's tags (5)
356
Views
0
Helpful
0
Replies