01-09-2007 12:08 AM - edited 03-03-2019 03:18 PM
How do i forward DHCP requests to a DHCP server from a Router?
Appreciate your quick response
Regards
Navneet
Solved! Go to Solution.
01-09-2007 12:28 AM
Hi Navneet,
You need to use "ip helper-address" command specifying the ip address of the dhcp server on the interfaces from which you want to forward the DHCP request.
To enable the forwarding of User Datagram Protocol (UDP) broadcasts, including BOOTP, received on an interface, use the ip helper-address command in interface configuration mode.
To read more about this command have a look at this link
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcr/tiad_r/adressht.htm#wp1135857
HTH
Ankur
01-09-2007 12:11 AM
Hi
Configure ip helper-address under the interface of the router from where you want to forward the DHCP requests.the helper address should be of the dhcp server.
Thanks
Mahmood
01-09-2007 12:29 AM
Thnx mahmood.
Regarda Navneet
01-09-2007 12:28 AM
Hi Navneet,
You need to use "ip helper-address" command specifying the ip address of the dhcp server on the interfaces from which you want to forward the DHCP request.
To enable the forwarding of User Datagram Protocol (UDP) broadcasts, including BOOTP, received on an interface, use the ip helper-address command in interface configuration mode.
To read more about this command have a look at this link
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcr/tiad_r/adressht.htm#wp1135857
HTH
Ankur
01-09-2007 12:30 AM
Thnks Ankur
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide