Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

dialer dialing even shutdown

with the below config, dialer 3 triggers once the below command is invoked

no backup interface dialer 3

-----------------------------------

interface Serial1/0/1

description Link to aaaaaaaaa

bandwidth 128

backup interface Dialer3

ip address 10.1.1.1 255.255.255.252

no ip unreachables

ip rip authentication mode md5

ip rip authentication key-chain RIP_KEY

encapsulation ppp

ip tcp header-compression

no ip mroute-cache

shutdown

fair-queue 64 512 3

clock rate 2000000

no cdp enable

end

interface Dialer3

description ISDN Backup NO: site 1

bandwidth 128

ip address 10.1.1.1 255.255.255.252

ip rip authentication mode md5

ip rip authentication key-chain RIP_KEY

encapsulation ppp

shutdown

dialer pool 3

dialer remote-name remoterouter

dialer idle-timeout 300

dialer string 111122222

dialer hold-queue 100

dialer-group 3

fair-queue 64 512 3

no cdp enable

ppp authentication chap

ppp chap hostname BahrainISDN

ppp chap password ourpassword

ppp multilink

ppp multilink links minimum 2

-------------------------------------------------------

sh ip int brief

Dialer1 10.127.254.250 YES TFTP up up

Dialer2 10.127.254.254 YES NVRAM up up

Dialer3 10.127.254.246 YES NVRAM standby mode/disabled down

Dialer5 10.127.254.234 YES NVRAM up up

1 REPLY
Silver

Re: dialer dialing even shutdown

Generally backup to a dialer interface is not a recommended one. It might shoot issues. But the bug CSCdm54742 is filed for this issue.

312
Views
0
Helpful
1
Replies
CreatePlease to create content