Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DIALER TRIGGERS ABNORMALLY!!!!!!!!!

Hello,

In what circumstances will a dialer triggers even if it is in shutdown mode?

CONFIGURATION BELOW

interface Dialer3

description ISDN Backup NO: site 1

bandwidth 128

ip address 10.1.1.1 255.255.255.252

ip rip authentication mode md5

ip rip authentication key-chain RIP_KEY

encapsulation ppp

shutdown

dialer pool 3

dialer remote-name remoterouter

dialer idle-timeout 300

dialer string 111122222

dialer hold-queue 100

dialer-group 3

fair-queue 64 512 3

no cdp enable

ppp authentication chap

ppp chap hostname BahrainISDN

ppp chap password ourpassword

ppp multilink

ppp multilink links minimum 2

-------------------------------------------------------

sh ip int brief

Dialer1 10.127.254.250 YES TFTP up up

Dialer2 10.127.254.254 YES NVRAM up up

Dialer3 10.127.254.246 YES NVRAM standby mode/disabled down

Dialer5 10.127.254.234 YES NVRAM up up

1 REPLY
Hall of Fame Super Silver

Re: DIALER TRIGGERS ABNORMALLY!!!!!!!!!

Celso

Are you sure that it is dialer 3 that is activating? With the dialer in shutdown I can not see a way that it would be dialing. If there are 3 other dialers that are up up, is it possible that one of them is activating? I would suggest that you run debug dialer and post the output from it on the next time that the router activates its dialing interface.

HTH

Rick

98
Views
0
Helpful
1
Replies