Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Silver

Difference in PA-MCX-8TE1 and PA-MC-8TE1+

I'm looking at terminating multiple E1s on a router, probably on a 7200. I can't see much difference in data capability of the two cards - PA-MCX-8TE1 and PA-MC-8TE1+.

Can someone highlighten me please.

2 REPLIES
Cisco Employee

Re: Difference in PA-MCX-8TE1 and PA-MC-8TE1+

One difference I know of is that the PA-MC-8TE1+ provides up to 256 channels, as compared to a maximum of 128 for the PA-MCX-8TE1

This allows for full channelization (down to the DS0 rate) for both T1 and E1 WAN links.

Hope this helps,

Harold Ritter
Sr. Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México 
Paseo de la Reforma 222 Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
New Member

Re: Difference in PA-MCX-8TE1 and PA-MC-8TE1+

Hello,

Mix-Enabled T1/E1 Port Adapter for Cisco 7200VXR Series Routers:

http://www.cisco.com/en/US/products/hw/modules/ps2033/prod_brochure09186a008007d45f.html

The MIX-enabled T1/E1 port adapter provides the ability to integrate voice and data on the same T1/E1 interface without the need for an external time-division multiplexing (TDM) device. With the "drop and insert" capability, DS0-level grooming is supported, thus providing cost-effective WAN access. Ports can be configured for voice, data, or both, depending on the application requirements.

High Density Aggregation With The PA-MC-8TE1+ Port Adapter:

http://www.cisco.com/en/US/products/hw/modules/ps2033/products_data_sheet09186a0080091c34.html

Cisco 7200 Series Routers Quick Look Guide:

http://www.cisco.com/en/US/products/hw/routers/ps341/products_data_sheet09186a0080116113.html

Hope this helps.

Regards,

James

196
Views
0
Helpful
2
Replies