Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Disable debugging in config

Since upgrading firmware, on each boot the router automatically turns on debugging, and it has to be manually switched off using the "undebug all" command. How do I stop this from occuring?

4 REPLIES
Hall of Fame Super Bronze

Re: Disable debugging in config

That's odd. Post show version and show debug from that router prior disabling the behavior.

__

Edison.

New Member

Re: Disable debugging in config

Thanks for the reply.

show version:

Cisco IOS Software, C870 Software (C870-ADVIPSERVICESK9-M), Version 12.4(15)T3,

RELEASE SOFTWARE (fc1)

show debug:

dot11:

dot11 Syslog debugging is on

Hall of Fame Super Bronze

Re: Disable debugging in config

CSCsi60925 Bug Details

dot11 syslog debug enabled by default

Symptom:

'show debug' shows that syslog debug messages are enabled by default.

Conditions:

On router boot up, dot11 syslog debug enabled.

Workaround:

None.

_____________

Status

Fixed

Severity

4

Last Modified

In Last 7 Days

Product

Cisco IOS software

Technology

1st Found-In

12.4(13.9)PI6a

12.4(13.13)T1

Known Affected Versions

Fixed-In

12.4(18.2)T

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=%20CSCsi60925

HTH,

__

Edison.

New Member

Re: Disable debugging in config

Thanks. Will change version.

690
Views
0
Helpful
4
Replies