A number of my remote sites have been converted from wireless wan links (via HWIC-3G-GSM cards) to wired wan links. The 3G WICs are still in the routers and due to their remoteness are likely to stay there. I've removed all the wireless configuration that I can find:
interface Cellular0/0/0 no ip address encapsulation ppp shutdown !
However the logs keep filling up with these messages:
Sep 13 14:35:08 AEST: %CELLWAN-2-MODEM_DOWN: Cellular0/0/0 modem is DOWN Sep 13 14:35:22 AEST: %CELLWAN-2-MODEM_UP: Cellular0/0/0 modem is now UP Sep 13 14:36:06 AEST: %CELLWAN-2-MODEM_DOWN: Cellular0/0/0 modem is DOWN Sep 13 14:36:20 AEST: %CELLWAN-2-MODEM_UP: Cellular0/0/0 modem is now UP Sep 13 14:37:04 AEST: %CELLWAN-2-MODEM_DOWN: Cellular0/0/0 modem is DOWN
What else do I need to do to disable the 3G WICs? Thanks.
So I can't actually run the "gsm radio off" command. The routers are 1841s with wic-3g-gsm WICs in them. There must be some other method for accessing the cellular controller on these boxes. I'll keep looking. Thanks.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...