Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

dividing bandwidth

We have 2 MB line terminated in 1921 Router.

Two customers are connected to Gigabit ethernet 0 and Gigabit ethernet 1.  2MB has to be devided among these customers, 1M etch.

Also need to give whole 2 M to one customer if other is not using their bandwidth.

Is this possible?

Thanks..

4 REPLIES
Hall of Fame Super Gold

dividing bandwidth

Routers do that automatically, so you don't need to do anything.

Moreover, download bandwidth is controller by ISP router, not your, so you cannot do much about it.

Community Member

Re: dividing bandwidth

I need to divide 2 M serial in to 2 ethernet links.

Outward shaping done but how about inbound? Policy map can not be applied to serial interface inward, complain about bandwidth statement.

Hall of Fame Super Gold

Re: dividing bandwidth

As mentioned already: you should not, and can not do anything about, for the reasons explained.

Super Bronze

Re: dividing bandwidth

Disclaimer

The  Author of this posting offers the information contained within this  posting without consideration and with the reader's understanding that  there's no implied or expressed suitability or fitness for any purpose.  Information provided is for informational purposes only and should not  be construed as rendering professional advice of any kind. Usage of this  posting's information is solely at reader's own risk.

Liability Disclaimer

In  no event shall Author be liable for any damages whatsoever (including,  without limitation, damages for loss of use, data or profit) arising out  of the use or inability to use the posting's information even if Author  has been advised of the possibility of such damage.

Posting

Outbound is easy, but you cannot effectively do it for inbound.

267
Views
0
Helpful
4
Replies
CreatePlease to create content