Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

DMVPN and QoS implementation

Hi,

I am looking for best practice of implementing QoS on DMVPN phase 3.

Thanks

2 REPLIES
Cisco Employee

Re: DMVPN and QoS implementation

Hi,

If you are using DMVPN for voice traffic, you can have a look to the following white paper:

http://www.cisco.com/application/pdf/en/us/guest/netsol/ns171/c649/ccmigration_09186a0080840eb4.pdf

Since 12.4T you have also per tunnel service-policy available:

http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_per_tunnel_qos.html

But if your marking happens before the packet is routed to the tunnel interface, DSCP field is copied from the inner to the outer header so you can apply also a service-policy directly on your WAN interface as you didn't loose your marking information.

One concern is if packets get delayed for a too long time because of high congestion they might be dropped on the other end because of the anti-replay window.

HTH

Laurent.

New Member

Re: DMVPN and QoS implementation

Thanks Laurent. No, we are using DMVPN for DATA for now and we have these two requirements:

1. QoS to put FTP and Netbios copy on Best Effort with limited bandwith.

2. Critical application, like, SQL, VDI "Virtual Desktop Infrastructure", Mail "Exchange", as mission critical with Garantie bandthwith

3. create Scavenger for not desired traffic "nepstart,...."

4. QoS for Video Streaming and video conferencing on I think Priority class.

We don't have voice now "using still PBX".

Thanks

232
Views
0
Helpful
2
Replies