I am trying to build a DMVPN as a backup for our MPLS WAN. The MPLS network is using BGP for its routing protocal and I would also like to use BGP on the DMVPN. The routers in each branch will have a DSL connection on its second ethernet interface. I have a separate 2811 router in the home office that will handle the DMVPN. My question is how can up update the BGP table for all the sites to see the second route through the DMVPN if the MPLS goes down? Should I put static routes into the table using a higher wieght for the DMVPN routes?
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...